 |
 |
| Carbide End Mill |
|
|
| Carbide End Mill |
| Products Introduction |
  |
|||||||
| HRC45, HRC50, HRC55, HRC60, the product of different hardness | |||||||
| ball carbide end mill(Standard length) | ball carbide end mill(Add length) | ||||||
| edge D | shank d | edge l | L | edge D | shank d | edge l | L |
| R 0.5 | 4 | 2 | 50 | r 1.5 | 4 | 10 | 100 |
| r 0.75 | 4 | 3 | 50 | r 2.0 | 4 | 10 | 100 |
| r 1.0 | 4 | 4 | 50 | r 2.5 | 6 | 10 | 100 |
| r 1.25 | 4 | 5 | 50 | r 3.0 | 6 | 12 | 100 |
| r 1.5 | 4 | 6 | 50 | r 3.0 | 6 | 12 | 150 |
| r 2.0 | 4 | 8 | 50 | r 4.0 | 8 | 16 | 100 |
| r 0.5 | 6 | 2 | 50 | r 4.0 | 8 | 16 | 150 |
| r 0.75 | 6 | 3 | 50 | r 5.0 | 10 | 20 | 100 |
| r 1.0 | 6 | 4 | 50 | r 5.0 | 10 | 20 | 150 |
| r 1.25 | 6 | 5 | 50 | r 6.0 | 12 | 25 | 100 |
| r 1.5 | 6 | 6 | 50 | r 6.0 | 12 | 25 | 150 |
| r2.0 | 6 | 8 | 50 | r 7.0 | 14 | 30 | 100 |
| r 2.5 | 6 | 10 | 50 | r 7.0 | 14 | 30 | 150 |
| r 3.0 | 6 | 12 | 50 | r 8.0 | 16 | 32 | 100 |
| r 4.0 | 8 | 16 | 60 | r 8.0 | 16 | 40 | 150 |
| r 5.0 | 10 | 20 | 75 | r 9.0 | 18 | 35 | 100 |
| r 6.0 | 12 | 24 | 75 | r 9.0 | 18 | 40 | 150 |
| r 6.0 | 12 | 24 | 75 | r 10.0 | 20 | 40 | 100 |
| r 6.0 | 12 | 24 | 75 | r 10.0 | 20 | 45 | 150 |